If you want the service life of the vacuum cleaner to extend, you must use the vacuum cleaner correctly and learn how to maintain it after use. This will extend the service life of the vacuum cleaner. Take a look at the following methods:
1. Check whether the dust bag is cleaned before use, and if necessary, it should be cleaned before use.
2. The continuous use time should not exceed 2 hours each time to avoid overheating and burning.
3. For vacuum cleaners with dust indicators, do not work after the dust is full. If you find that the machine is close to the full gear, you should immediately stop the machine and clean the dust.
4. When in use, you must stay away from water pumps, radiation sources and stoves.
5. When using it, pay attention to the insulation protection layer of the protective line to prevent damage caused by dragging on the ground for a long time.
6. First remove large pieces of dirt from the place to be cleaned with a vacuum cleaner to prevent sharp objects from entering the vacuum cleaner and damaging the motor.
7. It is strictly forbidden to place your hands or feet under the suction port during use to avoid danger.
8. The vacuum cleaner cannot be used to collect metal debris or burnt cigarette butts to prevent damage to the motor and dust bags.
9. The vacuum cleaner should avoid sludge, turbid water or other liquids to prevent leakage and damage to the motor.
When using a vacuum cleaner, you should also pay attention to the following maintenance and maintenance methods:
1. After using the vacuum cleaner, the vacuum cleaner and accessories should be wiped clean with a damp cloth, and then dry naturally in the air. The dirt in the dust collecting bag should be removed in time. If you do not need it for the time being, use warm water to clean the dust collecting bag and then dry naturally in the sun. Remove hair and thread chips from the brush floor.
2. Check the wear of the brush frequently. If it is found that the wear is serious, a new brush should be replaced.
3. Check all fastening parts frequently, and tighten them at any time if they are loose.
4. The brushes on the vacuum cleaner motor are also prone to wear, so you should pay attention to repair and replace them.
5. The bearings of the motor must be regularly lubricated.
6. Do not place the vacuum cleaner in a humid place with corrosive gases.